Security Systems
- Software Help
Choose A Help Topic :
Scheduling
A schedule can be used to selected cameras
at different times, and select whether alarms or activity
is enabled.
The schedules have two
options:
Video Schedule:
A schedule starts the surveillance system at user-defined
date and times.
I/O Schedule:
A schedule starts I/O surveillance at user-defined date
and times.
Set your surveillance preferences:
[Time] Enter
Start and End time of the schedule.
[Monitor Invoke]
Sets alert methods in case of motion.
Rec.
Select to record while monitoring. From the drop-down
list, select to record the videos by Motion Detect or
Round-the-Clock.
Pager/E-Mail.
Pager or e-mail alerts on event activation.
Output.
Select to trigger corresponding I/O devices in case
of motion. To set the corresponding I/O device, see
Adjusting Individual Camera on page 22 in this chapter
for details.
[Remote]
Click to send the triggered images to these applications.
View.
Sends videos to Remote View application (Remote View
application must be open to receive the videos).
Center.
Sends live videos to Center. From the drop-down list,
select whether to send videos when Motion Detect or
Round-the-Clock. (Center must be open to receive the
videos).
[Week Days Enable Schedule]
Press to select days for the video schedule.
[Start] Grayed
out. It will be enabled only in I/O Schedule.
[Camera]
Select to apply all settings to selected cameras. Cameras
that are not connected are grayed out.
1.
Press Add Schedule to confirm all settings. The new
schedule will be listed in different bar
colors
in the Schedule List Window if setup successful. Color
presents following actions would be started within the
defined time:
Red:
Recording enabled
Green:
Pager/e-mail notification enabled
Blue:
System will send videos to Remote View
Jade:
I/O monitor enabled
Purple:
System will send videos to Center
2. Repeat
the process to set up more schedules.
3.
To modify a schedule, select the schedule you wish to
make the change, then press Modify Schedule button to
modify.
4. To
delete a schedule, select the schedule and hit the Delete
key on keyboard. Click OK to apply schedule.
To configure a schedule for Holidays, follow these steps:
1.
Select the Holiday Schedule in the Setup Schedule –
Add period schedule dialog box.
2.
All setups are the same as in Weekly Schedule, except
the section shown as follows. Click the drop-down arrow
and select a date from the pop-up calendar. Click Apply
to add dates to holiday schedule.
|
